https://www.lozierproducts.com/products/widespan-gravity-flow-battery-rack/
Back to All Products  |   You are in: Lozier Products   >   Products   >   Widespan Gravity Flow Battery Rack

Widespan Gravity Flow Battery Rack

Widespan Gravity Flow Battery Rack

Battery Rack
  • Battery Rack

Roll over image to zoom in.

Contact to Order
Download PDF Print Email

Product Details

  • Shelving configuration supported by Widespan Uprites 24″, 30″, 36″, or 48″ deep
  • Utilizes Widespan Gravity Flow Inverted Beams installed offset. Rear beam is installed higher (See chart below with available offsets for respective depth and downslant angle)
  • Widespan Gravity Flow Inverted Beams available 48″W
  • Optional Gravity Flow Lane Guides install on grid wires to separate merchandise
  • Gravity Flow Waterfall Wire Shelf includes welded steel support channels for merchandising heavy products like car batteries. Grid installs in the inverted step of the front and rear beam
  • Wire shelf grid spacing is 3″ x 3″ on center

How to Order

  • Order Widespan Uprites separately 24″, 30″, 36″, or 48″ deep in desired height (two required per individual section run and one additional for add-on sections)
  • Order two 48″W inverted Widespan Beams per Gravity Flow level. A minimum of two beam levels is required per section. That could include a combination of Gravity Flow levels and flat levels. (see widespan shelf assemblies to order flat levels)  A beam must be installed within 6″ of the floor and maximum spacing between beams is 48″
  • Order one 48″W Gravity Flow Waterfall Wire Shelf for each Gravity Flow level (See chart offset and respective angle)
System Depth Offset (Inches) Downslant Angle (deg.)
24 2 6.84
30 4 9.17
36 6 10.71
48 8 10.41
Battery Rack - Exploded

COMPONENTS (ORDER SEPARATELY):

A – Widespan Uprite Frame
B – Widespan Gravity Flow Inverted Beam (two per shelf level)
C – Widespan Gravity Flow Waterfall Wire Shelf
D – Widespan Gravity Flow Lane Guide

Widespan Uprite Frame (One-Piece 48"H - 120"H)

Product Details

  • One-piece Uprite Frames for units 48” – 120”
  • Uprite post slotted on face, allows shelf adjustment 2” on center
  • Square holes punched on sides of Uprite post for accessories
  • Accessory holes punched 6” on center on face of Uprite also aid beam placement
  • Top Caps included on each Uprite
  • One Frame required for each section, plus one at end of each run
  • To provide increased protection under harsh shipping conditions add “SPC” to part number for additional packaging
  • Floor Anchors, Floor Protectors, or Back to Back Connectors may be ordered separately
  • Evenly distributed load of 10,000 lbs per Uprite Frame at 48″ max. Beam spacing, vertically

 

REINFORCED UPRITE FRAME

  • “RE” Frame available in 72” – 120”H and all depths (lower Frame only on 132” – 192”)
  • For use with hand loader/stacker
  • Reduces chance of Frame damage
  • Channel welded inside each post in lower 48”
  • Welded foot plate for anchoring, 1/2” hole

 

widespan reinforced uprite frame

Save

View product details

Product Options and Numbers

Example Part #:   WSU   18    048   RE   SPC   PLT

 

Widespan Uprite : WSU

Depth: 18”, 24”, 30”, 36”, 42”, 48”

Height: 048”, 060”, 072”, 084”, 096”, 120”

Reinforced Uprite for Hand Loader/ Stacker Applications: RE, Leave blank if not applicable

Additional Packaging: SPC, Leave blank if not applicable

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
PLT -Platinum

Widespan Gravity Flow Inverted Beam

Product Details

  • Available 48″ Wide
  • 3 1/4″ high with inverted step
View product details

Product Options and Numbers

Example Part #:   WSB   I   48   PK4   PLT   

Widespan Beam: WSB

Inverted:  I

Section Width: 48″

Unit of Measure: PK4

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PK4 – 4 Pack
PLT – Platinum

Widespan Gravity Flow Waterfall Wire Shelf

Product Details

  • Available 48W widespan section
  • Fits widespan depth 24″, 30″, 36″, or 48″
  • Heavy gauge wire provides ability to merchandise heavy product like car batteries
  • 3×3 grid spacing
  • Fixed Offset for specific depth (see chart)
View product details

Product Options and Numbers

Example Part #:   WSGFWS   48   36   6   EA   PLT

 

Widespan Gravity Flow Wire Shelf: WSGFWS

System Width: 48″

System Depth:  24″,  30″, 36”, 48″

Beam Offset: 2” (24″ Deep), 4″ (30″ Deep), 6″ (36″ Deep), 8″ (48″ Deep)

Unit of Measure:  EA

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
EA – Each
PLT – Platinum

Widespan Gravity Flow Lane Guides

Product Details

  • Available 18″, 24″, 30″ and 42″ long
  • Order 6″ less than nominal widespan gravity flow waterfall wire shelf depth
  • Installs on 3×3 waterfall wire shelf wires
  • Organizes shelf by creating product lanes
View product details

Product Options and Numbers

Part Number Application
WSGFLG18PK25 18D for 24D Shelf
WSGFLG24PK26 24D for 30D Shelf
WSGFLG30PK20 30D for 36D Shelf
WSGFLG42PK30 42D for 48D Shelf

Recommended Products

Need Something Different? Let’s Talk.

Work with our design and engineering teams to create fixtures that meet your needs. We have access to a wide variety of materials, colors and capabilities to bring your vision to life.

Learn more

Lozier is here to help.

Check out the Services section for all the services Lozier has to offer.  Have an idea you want to explore? Our design and engineering teams are ready to help.

Learn more