Contoured End Display

Contoured End Display is a freestanding end display similar to the Wall End Display. It features Shelves and Decks with rounded edges, giving your display a softer look.

Contoured End Display

Contoured End Display is a freestanding end display similar to the Wall End Display. It features Shelves and Decks with rounded edges, giving your display a softer look.

Roll over image to zoom in.

Contact to Order

Download PDF Print Email Brochure 2D Fixture CAD Blocks 3D Fixture CAD Blocks

Product Details

Load Rating

600 lbs evenly distributed per deck (13″ – 19″ D)
800 lbs evenly distributed per deck (22 – 25″ D)

Same as Wall End Display except includes Contoured End Decks and Contoured Base End Trims.
Contoured Shelves also available (ordered separately)
Order Gap Filler to close off the bottom rear when unit is wider than the island width.
Actual width of unit equals nominal width plus 2″
Accepts Accessory Panels and connectors
Stabilizers required and ordered separately for Non-Compliant height to depth Contoured End Displays (See Product Safety information for Height to Depth Chart)
Contour decks and shelves with only one round corner available for two section displays.

How to Order

	COMPONENTS (ORDER SEPARATELY)	QTY.
A.	Uprite	2
B.	Base Bracket (Standard or Heavy Duty)	2
C.	Contoured End Deck	1
D.	Closed Base Front	1
E.	Top Rail	1
F.	Center Rail (2 per section 78H-120H)	1 or 2
G.	Bottom Rail	1
H.	Splicer Rail (Sections 78H-120H) Use 2 top rails for splicer on 2′ and 30″ wide sections.	1
I.	Back Material (1 or 2 per side)	See Back Chart
J.	Contoured Base End Trim (Pair)	1
K.	Uprite End Trim	2

CONTOURED END DISPLAY – SIZES
Depth	Height
Depth	48″	54″	60″	66″	72″	78″	84″	90″	96″
13″			N/A	N/A	N/A	N/A	N/A	N/A	N/A
16″						N/A	N/A	N/A	N/A
19″									N/A
22″
25″

Uprite

Product Details

3/16” thick face channel
1” slotted on center for maximum flexibility
Use for Wall and Island Sections
Steel welded construction
Includes side flanges to retain Back material, leveling leg for uneven floors
Includes Top Caps on Uprites 36”-66”H

uprite diagram

View product details

Product Options and Numbers

Example Part #: U 42 PLT

Uprite: U, UH

U Height: 30”, 36”, 42”, 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90”, 96”, 102”, 108”, 114”, 120”

UH Height: 72”, 78”, 84”, 90”, 96”, 108”, 120”

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum
U	– Uprite
UH	– Heavy Duty Uprite

Spring Locking Base Bracket

Product Details

Features 2” conduit hole for greater electrical access
Includes leveling legs for uneven flooring
Install straight in using integral spring latch
28″ deep and 31″ deep base brackets are only Heavy Duty. There are no Standard Duty 28″ deep or 31″ deep base brackets.

NOTE
Actual Bracket length is 3″ less than nominal Deck depth. Order CHR Base Brackets when using Open Base Fronts. (This is done automatically when section/end part numbers are ordered with OBF’s.)

View product details

Product Options and Numbers

Example Part #: BB 19 06 S PTD

Base Bracket: BB (Standard Duty), BBH (Heavy Duty)

Deck Depth BB: 13″, 16″, 19”, 22”, 25”, 28”, 31”

Deck Depth BBH: 16″, 19”, 22”, 25”

Base Height: 06, LB

Spring Locking Base Bracket: S

Standard Finish: PTD, Optional CHR

* BB28 and BB31 are rated for Heavy Duty

Suffix Key
06	– 06 Base (8″H)
LB	– Low Base (6″H)
PTD	– Painted Random
CHR	– Charcoal Black

Contoured End Deck

Product Details

Features rounded corners
1.235″ Tag Molding formed on three sides
Will not accommodate Wire Fronts
Evenly distributed load of 600 lbs per Deck
Available in Standard (rounded corners both sides) or LH and RH (rounded corner one side only)

View product details

Product Options and Numbers

Example Part #: CED 4 19 N PLT

CED: Contour End Deck

Round Corner: L (Left hand), R (Right hand) Blank (Both)

Width: 2′, 30″, 3′, 4′

Depth: 13″, 16″, 19″, 22″, 25″

No Molding: N

Standard Finish: PLT Optional Catalog Colors

Suffix Key
N	– No Molding
PLT	– Platinum

Closed Base Front

Product Details

3’ and 4’ Fronts have an electrical knockout
Snaps in place beneath Deck to cover gap between Deck and floor
Fits flush with floor regardless of leveling adjustments

View product details

Product Options and Numbers

Example Part #: CBF 4 06 CHR

Close Base Front: CBF

Section Width: 2’, 30”, 3’, 4’

Base Height: 06, LB

Standard Finish: CHR

Suffix Key
06	– 06 Base (8″H)
LB	– Low Base (6″H)
CHR	– Charcoal Black

Top Rail

Product Details

All Island and Wall Sections require one Top, Center and Bottom Rail
2’ and 30” sections use two Top Rails to make a Splicer Rail
Electrical knockouts included on all Rails

View product details

Product Options and Numbers

Example Part #: R 4 T PLT

Rails: R

Width: 2’, 30”, 3’, 4’

Top Rail: T

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum Color

Center Rail

Product Details

All Island and Wall Sections require one Top, Center and Bottom Rail
96”H-144”H Backs require two Center Rails
Center Rail finish is always N/A because it’s hidden
Electrical knockouts included on all Rails

View product details

Product Options and Numbers

Example Part #: R 4 C N/A

Rails: R

Width: 2’, 30”, 3’, 4’

Center Rail: C

Standard Finish: N/A

Bottom Rail

Product Details

All Island and Wall Sections require one Top, Center and Bottom Rail
Electrical knockouts included on all Rails
Also used for 2′ and 30″ Slotwall Backs

View product details

Product Options and Numbers

Example Part #: R 4 B PLT

Rails: R

Width: 2’, 30”, 3’, 4’

Bottom Rail: B

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum Color

Splicer Rail

Product Details

All Island and Wall Sections require one Top, Center and Bottom Rail
78”H – 144”H Backs require one Splicer Rail
Splicer rail is not available in 2’ or 30”
Use two top rails for splicer rail on 2′ and 30″ wide sections.
Electrical knockouts included on all Rails

View product details

Product Options and Numbers

Example Part #: R 4 S PLT

Rails: R

Width: 3’, 4’

Splicer Rail: S

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum Color

Hardboard Backs

Product Details

Use one-piece Backs for heights 36”-72”
For heights above 72” order 2 backs, see table below
Pegboard 9/32” diameter holes, 1” on center
To order the correct size Back, take Uprite height minus 6

View product details

Product Options and Numbers

Section Heights: 78″-120″ Use 2-Piece Backs
Uprite Height	Order Backs
78″	BE_36 + BE_36
84″	BE_30 + BE_48
90″	BE_36 + BE_48
96″	BE_42 + BE_48
102″	BE_66 + BE_30
108″	BE_66 + BE_36
114″	BE_66 + BE_42
120″	BE_66 + BE_48

Actual Back Height Information
Uprite Height	Nominal Back Height	Actual Height
30″	24″	23 13/16″
36″	30″	29 13/16″
42″	36″	35 13/16″
48″	42″	41 13/16″
54″	48″	47 13/16″
60″	54″	53 13/16″
66″	60″	59 13/16″
72″	66″	65 13/16″

Actual Width Information
Nominal Width	Actual Width
6″	4 17/32″
12″	10 17/32″
16″	14 17/32″
18″	16 17/32″
24″	22 17/32″
30″	28 17/32″
32″	30 17/32″
36″	34 17/32″
42″	40 17/32″
48″	46 17/32″

Actual Back Height for Extension Uprite
Uprite Height	Actual Height
6″	5 13/16″
12″	11 13/16″
18″	17 13/16″
24″	23 13/16″
30″	29 13/16″
36″	35 13/16″
42″	41 13/16″
48″	47 13/16″